A plume of silver sparks gently flow down from above, resembling a classic waterfall.
Holes are located at the bottom of the tubes for suspending on a cable/truss.
Please note that red caps are no longer fitted or supplied with our Waterfalls. If required, they can be sent out AT THE TIME OF ORDERING for an additional charge. However, should red caps be needed without the Waterfalls themselves, they can also be purchased separately.
A falling stream of gold or silver glittering sparks with a strobe effect. The duration is 10 seconds. Position several spaced across a truss for a dazzling stage effect.
Standard: The bulk of the effect reaches 8ft. Some of the effect may fall to around 10-15ft.
Large: The bulk of the effect reaches 12-15ft. Some of the effect may fall to around 20ft.
Available in Gold and Silver.
A cascade of silver sparks that fall down from a height. A denser effect than the Waterfalls.
Holes are located at the bottom of the tubes for suspending on a cable.
Cascades are a category T2 product, intended for use only by persons with specialist knowledge. See more here or view the CE Directive information in the Documents tab on this page.
The first number shows the burn time (in seconds) and the second number shows the drop (in feet). The effect is full to a cut-off point given by the drop height, i.e. a 10x8 should not have any sparks much beyond 8’. There is some hot fallout.
Other durations and drops are available on request for Waterfalls and Cascades, with a minimum order of 10 boxes and a two week lead time.